HDR 3-roll plate bending machine│The ”genius“ among plate bending machines

High performance
Multiple possibilities

HDR 3-roll plate bending machine

A machine as flexible
as is its variable geometry

First-class HAEUSLER quality and expertise paired with durability and low operating costs – this is exactly what you get with the 3-roll plate bending machine HDR from HAEUSLER. The HDR convinces by the individually adjustable bending geometry of the bottom rolls, which enables rolling of very thick plates as well as small diameters. Best bending results can be achieved thanks to the use of the patented top roll adjustment by using only pressure loaded cylinders and thus resulting machine symmetry.

Advantages
at a glance

Best bending results

Easy maintenance

Highest accuracy

Optimum roll material

Highest torques

Easy to operate

Power development
mit sensitively

There a different designs of 3-roll bending machines, where the most advanced design is characterized by its variable adjustment of the rolls. Following this variable machine geometry the HAEUSLER HDR allows linear adjustment of the 2 bottom rolls independently from each other, while the top roll can be adjusted vertically. All 3 rolls can be driven, inclined roll setting enables cone bending.

This design principle offers, compared to all other 3-roll machines, significant advantages regarding minimization of flat ends, best bending quality and workpiece handling. In addition, the HDR system is the only concept where the bending geometry can be set variably. This means that the deformable wall thicknesses can be adjusted according to the position of the bottom rolls within the performance range of the machine.

The smaller the asymmetry of the bottom rolls to the top roll, the greater the possible wall thicknesses by accepting longer flat ends. The maximum deformable wall thickness is obtained with symmetrical position of the bottom rolls. Due to this functional principle, even the thickest plates can be bent with relatively low forces and thus extremely economically.

pointer

Best bending results

Due to the patented adjustment of the top roll over four identical cylinders, an absolute bending symmetry can be achieved - this is the basis for perfect bending results.

pointer

Highest accuracy

By using special T-slides in the drive and hinged bearing stand, the guideways are more than doubled compared to other suppliers. This allows the highest bending accuracies to be achieved on a permanent basis

pointer

Optimum roll material

HAEUSLER uses only the most suitable roll material for our bending machines. The material is forged at our partner forges as close as possible to the final contour and then finally machined. This ensures that the properties produced by the forging process are optimally transferred to the finished roll. For our customers, this means maximizing of components life time.

pointer

Highest torques

By using rotary drives with very high torques, we enable our customers to finish their products in just a few passes, thereby increasing their productivity. In addition, all rotary drives are equipped with a fast reacting brake system as standard. This ensures precise and safe operation.

pointer

Easy maintenance

All main cylinders of the machine can be reached in a few easy steps and guarantee easy and quick maintenance.

pointer

Easy to operate

The menu navigation on the touch screen control is intuitive, the machine actively supports you in operation. All bending relevant data can be displayed and adapted on the control system.

Standard equipment

Automatic central grease lubrication for easy maintenance

By using an automatic central grease lubrication system, all relevant points of the machine are automatically lubricated.

Fast reacting overrun brake for precise bending

The quick-reacting overrun brakes fitted as standard enable the operators to work very precisely. Furthermore, these brakes are an important safety factor, as they prevent plates from slipping out of the machine unintentionally.

Ethernet connection for online access

The online access enables our service engineers to access our customers’ machines within the shortest possible time and guarantees an optimal support.

Optional equipment

Change rolls for bending small diameters

Exchangeable rolls enable our customers to bend even very small diameters. HAEUSLER machines are equipped in such a way that the roll in use is automatically recognized and the operating pressure is regulated accordingly.

Plate stops for plate positioning

The optionally available plate stop simplifies the alignment of the plate in the machine, is time saving and helps to achieve best bending results.
Faster rotation for increased productivity

Faster rotation for increased productivity

Especially when bending very large diameters, the speed of rotation of the machine is decisive for productivity. For this reason HAEUSLER machines can be equipped with an increased rotational speed of up to 8m/min.

Optional accessories

Upper support for simplified bending of large diameters

By using an automatic central grease lubrication system, all relevant points of the machine are automatically lubricated.

Lateral support for simplified bending of large diameters

The quick-reacting overrun brakes fitted as standard enable the operators to work very precisely. Furthermore, these brakes are an important safety factor, as they prevent plates from slipping out of the machine unintentionally.

Infeed roller table for quick and easy feeding of the plates into the machine

The online access enables our service engineers to access our customers’ machines within the shortest possible time and guarantees an optimal support.

HDR applications
the universal bending genius.

Due to the variably adjustable bending geometry of the HAEUSLER HDR, the areas of application of the machine are extremely versatile. Thus HDRs are often used in the following industries:

Plate Bending
for shipbuilding

The HAEUSLER HDR is used in the construction of container, passenger and naval ships, among others.

Plate bending for the
Production of wind energy.

With HAEUSLER plate bending machines you are well prepared for the growing demand for wind turbines by increasing your output and flexibility

Plate bending for
Power plant construction.

HAEUSLER plate bending machines are used by leading power plant suppliers for all bending and forming operations up to reactor construction.

Plate bending for the
On- & Offshore Industry.

HAEUSLER has many years of experience in the development and production of production machines for on- and offshore applications.

Plate bending for the
Construction of pressure vessels.

Do you produce a wide variety of tank products & do you need to be very flexible & fast in production to adapt to the needs of your customers? Our machines are the answer to this challenge!

With best recommendations

”WE ARE CONFIDENT THAT WE HAVE MADE THE BEST CHOICE“

We own two HAEUSLER HDRs (4000 mm x 150 mm and 3000 mm x 115 mm). Both machines fully meet the promised capacities and performance. The quality of the machines is excellent, as well as the service we were able to enjoy during and after installation. After four years of production we are sure that we have made the best choice.

Harry Breman, Breman Machinery BV, Netherlands, Managing Director

Learn more?

You can find more information about HAEUSLER HDR in our product brochure.